• The mags are a benefit, and you will like having them, but you'll want to check them very carefully. Front wheel mags made before 1981 do not have...

Item number 5 is covered in detail here...

When we put any vehicle back on the road after a long sit there is a initial installment of work... replace battery, replace tires, change oil, etc. T...

That's great news !Ride report when you get back.

1. Describe your plug reading method, please. • You should not be pulling your plugs out on a whim and then judging or tuning anything by what you s...

I agree. Some thoughts.... • BP7ES plugs should run perfectly in most any Airhead. • Have you replaced (simply due to age) the plug caps and plug...

The potmetal gear slipping on the steel shaft is a common issue. The problem shows up as odometer issues. Snowbum suggests cleaning the shaft and side...

Check the ads in your Airmail first.

After any type of sanding/polishing takes place on older spokes they will certainly look better, yes. But that same action is also busting through eve...

Lots of dual carb bikes use a balance tube. I had a late 80's R100 with that tube on it and it didn't seem to hurt or help. I left mine in-place mainl...

Here's a similar needle bearing cage which has a gapped ends....

Thanks for the very clear photo. • The "crack" is in the needle bearing CAGE, not the race. The cage keeps the bearings from touching each other as ...

First understand, I have never done this repair. The following is my best guess after reviewing exploded diagrams of the final drive housing. • Sinc...

• Not clear which size you purchased, the traditional Inch size or Metric, but generally speaking, increase the pressures printed in the manual by 10-...

Glad to help.